Add comment

I would like to get NetFlow information from individual layer 2 switch ports.

The commands you need for layer2-switched traffic:

ip flow ingress layer2-switched vlan <vlanlist>
ip flow export layer2-switched vlan <vlanlist>

However, from the IOS guide: A PFC3B or PFC3BXL running 12.2(18)SXE or higher is required for this command, which enables NDE for all traffic within the specified VLANs rather than just inter-VLAN traffic.

If you are using a CatOS you may use the following command:

set mls bridged-flow-statistics enable <vlanlist>

Name:
Email:
* Comment: (Use BBcode )

* Confirmation code:	Write the characters in the image above exactly as you see it